Hume internal magnetic camera



احمِ منزلك أو مكتبك بكل ثقة مع SkyGuard 1080P، الكاميرا الذكية اللاسلكية التي تجمع بين الأمان، السهولة، والتكنولوجيا الحديثة. بدقة تصوير Full HD 1080P، ورؤية ليلية واضحة حتى 8 أمتار، ستتمكن من مراقبة كل لحظة – ليلًا ونهارًا. تعمل الكاميرا على شبكة Wi-Fi 2.4GHz، وتأتي مزوّدة بـ بطارية قوية 10400mAh تتيح تشغيل طويل بدون الحاجة إلى تمديدات. بفضل حساس الحركة PIR، ستحصل على تنبيهات فورية عند أي حركة غير طبيعية في محيطك. تحكّم عن بُعد من خلال تطبيق "Huem" على جوالك، وابقَ على اتصال مع من تحب بفضل خاصية الصوت ثنائي الاتجاه التي تتيح لك التحدث والاستماع مباشرة عبر الكاميرا. تصميم ذكي وسهل التثبيت مع قاعدة مغناطيسية وخيارات تثبيت متعددة تجعلها مثالية للاستخدام داخل المنزل أو في المناطق المحمية خارجيًا.
Basic features:
Camera type:wireless WiFi camera.
Sensor: 1/3 " Full HD CMOS 3.6 mm.
Camera resolution: 2 megapixels (1920*1080).
Noise: ≥52dB.
Operating system: Lite OS.
Infrared illumination: 850nm-8M.
Minimum illumination:
Color: 1 lux.
Night: 0 Lux.
Wi-Fi support: IEEE802.11b/g/n 2.4 G.
Lens: 0-10m.
Motion detection distance: 120°.
Motion detection angle: 120°.
Working humidity: ≤80%RH.
Compatible apps: Huem for Android and iOS devices.
SD card support: up to 128 GB.
Battery capacity: 4 18650 lithium batteries with a total capacity of 10400mAh.
Device management:
Video playback: supports video playback from Micro SD card.
Video recording: the recording is activated when the device is woken up by the application, when the Home button is pressed, or when motion is detected by the PIR sensor.
Note: the device supports only FAT32 format memory cards.
Working mode:
Energy saving: the device only works when motion is sensed by PIR.
Continuous: the device works continuously until the battery runs out.
Pir sensitivity settings:
Low: the device wakes up and records if motion is detected for more than 7 seconds.
Medium: the device wakes up and records if motion is detected for more than 5 seconds.
High: the device wakes up and records if motion is detected for more than 1 second.
Power management settings: display the working status of the power or set the low battery alarm limit (10% -30%).
Storage Settings: Display memory card capacity and memory card formatting interface.