Dual Touch Smart Wi-Fi Wall Switch

Can the switch be installed without a Neutral wire?
Yes, there are two versions of the switch:

• Without Neutral version: Does not require a neutral wire. It operates using a capacitor connected between the L (Live) and Neutral lines in the circuit.
• With Neutral version: Requires a direct connection to a Neutral wire.

How is the switch mounted on the wall?
The back housing is fixed into the wall box with screws. Then, the upper unit is mounted and covered with the glass panel, followed by connecting the power supply.

How can I check the Wi-Fi connection status?
The LED indicator on the switch displays the connection status:

• Off: Successfully connected to the app.
• Slow blinking: Not connected yet.
• Fast blinking: In pairing mode with the app.
• Blink every 3 seconds: In Access Point (AP) Mode.

How do I reset the switch?
Press and hold any button for 10–12 seconds until two "beep" sounds are heard, indicating a factory reset.

Does it support RF remote control?
Yes, if the model supports it. To pair, press and hold the button for 4 seconds while powered, then follow the beeps to confirm pairing. To unpair, hold for 6 seconds.

Can it be used with the Huem app? How?
Yes, the app is available on Google Play and the Apple Store. After installing, create a “Home,” then add the switch via Bluetooth or Wi-Fi after powering it on.

Does it support BLE or only Wi-Fi?
It supports both: BLE (Bluetooth Low Energy) for easy initial setup, and Wi-Fi for network control.